Applying Wall Tatoo

Before you start to apply your new Shevone Tatoos, we suggest you take a minute to prepare yourself and read these instructions through fully. Although Shevone's Tatoo is easy to fit, it does require a little patience for larger items. It’s a good idea to plan where you are going to put your new purchase in advance of peeling the silicon paper off. Care needs to be taken when fitting Shevone's Tatoo as it is not a reusable item, it can be easily removed but it will more than likely be damaged.

Freshly painted walls should be allowed to dry for 2 weeks before applying. To prepare the surface before applying your wall stickers, you must thoroughly clean the surface of dust or grit which will show up and spoil the final look of your design. Make sure you wipe the surface well and leave to dry before attempting to apply. Then take the scraper provided and rub it on the back of the Shevone's wall tatoo to allow the transfer paper to re-attach the vinyl wall sticker.

1. You will receive the finished product and transfer paper. Take off the transfer paper.

2. Paste the transfer paper on the finished product then follow by compaction using ruler/ flat material to make sure it is flatten. Make sure all the area of the design is fully covered by the transfer paper.

3. Clean your wall with a clean cloth. and mark the place you wish to locate them.

4. Uncover the transfer paper; make sure the finished product of your wish is attached on the transfer paper. (Selective-choosing method) 

5. Paste on the wall at your ideal location correctly, follow again by pressing and compaction using ruler, letting the design sticks on the wall firmly. For a better result, please press carefully and gradually from top to bottom to avoid bubbles entrapment. 

6. Take off the transfer paper by tearing from one of the corner, the product is now on the wall !

P.s : Layout your design before applying. Use a small piece of tape to hold your shapes in place so you can make sure everything is where and how you want it. Transfer paper is reusable. 

We have industry experience of applying vinyl which we have tried to pass on in a simple easy to use way, however we cannot take any responsibility for errors you make during the fitting of your wall tatoo. We also cannot be held responsible for any damage to paint work when you are removing wall tatoo. This is a DIY home decoration product and is supplied on the premise that you may have to touch up areas of paintwork after removal.