Guidelines1. Wall Sticker is best suited for applications that require easy removal from smooth flat interior surfaces including painted dry walls that are smooth, clean and non-textured. 2. Always roll your Wall Sticker NEVER fold or crease the material. 3. Wall Sticker must be at room temperature prior to installation. Avoid excessive exposure to extreme temperatures and humidity. 4. Surface must be cleaned prior to applying Wall Sticker. DO NOT USE SOAP OR ANY HOUSEHOLD CLEANING AGENTS. Only wash surfaces with water and a CLEAN cloth. Surface must be completely dry before applying graphic. 5. For application, you can use either a ruler or plastic squeegee or a clean, dry, unused paint roller to eliminate any air bubbles. NOTE: Always wrap a clean sock around the plastic squeegee to avoid abrasions on your Wall Stickers. 6. Painted walls should be allowed to dry 30 days prior to installation of Wall Sticker. 7. It is recommended that these steps are followed by 2 people for larger pieces. 8. You can position your Wall Stickers in the desired location and hold in place with masking tape. 9. Never allow the Wall Sticker to adhere to itself. If this does happen, do not panic, gently pull the two areas apart and re-apply. 10. Do not place a sticker within reach of a young child's crib or bed to avoid the possibility of the sticker falling into the infant's possession without supervision. Avoid placing the stickers near direct sources of heat. 11. To clean Wall Sticker, use a cloth or paper towel moistened with water only and gently blot. Do not soak, rub or use soap or abrasives. The stickers can be damaged by moisture. We recommend keeping them dry. 12. Wall Stickers have been tested on and successfully removed from many surfaces. Due to the variety of surfaces, we cannot guarantee that our decals will adhere to all surfaces. Please follow our guidelines for application and have fun with them! |
